Experienced a cold winter, you have a good time, the doors and Windows of the house is warm, I believe that many owners will see here to Xiaobian big spit. Then the poor tightness of doors and Windows will directly cause a series of bad problems such as door and window air leakage, rain leakage and so on. Today, Xiaobian will explain in detail the effective method to solve door and window air leakage and rain leakage, hoping to help you!

Air leakage in doors and Windows will cause low temperature

Normally, doors and Windows have service life. If the quality of doors and Windows is not up to standard, there will be air leakage, rain leakage and other conditions. At the same time, the frequent switching of Windows will also affect the advance aging and deformation of sealing rubber strips. So the main cause of air leakage in doors and Windows is the aging of the seal or improper installation.

Door and window leakage solution

1. First of all, we should observe what is the cause of air leakage in doors and Windows. At the same time, if the gaps in doors and Windows are too large, we can use sealant to fill the gaps so as to reduce air intake.

2, if the size of the door and window glass is no problem, there is no damage to the sealing rubber strip, then it is likely to be caused by the door and window glass without reinforcement.

3, if you still feel the door and window into the wind may wish to hang a relatively heavy curtain, so that the use of curtain coverage can block part of the wind, so as to make the house more warm.

4, if the air leakage is left over because of the installation problem, then we had better clean up the gap between the window frame and the wall, and then fill the gap with cement and sand, which can effectively reduce the air leakage problem.

5. There is another important problem that leads to window air leakage, which is mainly caused by the failure of sealing accessories. In this case, the sealing rubber strip can be replaced directly, which is an effective and direct method.