Now the sliding door has been popular with almost every household has used the sliding door, but although the sliding door is easy to use, if you do not know how to maintain, it will cause durability reduction and other situations, so today Xiaobian will detail the daily maintenance method of the sliding door, every sentence is the focus of hope that you will help!

How to clean the sliding door

Sliding door after a period of time, there will be more or less dirt, if not cleaned up in time, the moisture in the air will make these dirt more cohesive force, resulting in sliding door corrosion phenomenon. So why the sliding door will gradually discolor oxidation is caused by this reason. Therefore, it is recommended that the cleaning cycle of the sliding door be half a year, and the surface should be wiped with a soft and dry cotton cloth, so as to avoid scratching the surface.

Maintenance method of sliding door pulley

Pulley is the soul of the whole sliding door, if there is a problem with the pulley, then the sliding door can not be used, you can imagine its importance. However, pulley maintenance is also very simple about six months to point one or two drops of lubricating oil on the surface, while paying attention to keep the track clean and free of debris.

The proper use of sliding doors

Sliding door daily correct use can solve the problem of 80% durability cutting, 1, remember not to push the sliding door, otherwise it is easy to lead to sliding door pulley deformation or track deformation. 2. It is strictly prohibited to use blunt objects or gravity to damage the moving door and track. If the sliding door is not smooth or derailed, the relevant personnel should be contacted in time for maintenance, rather than pulling hard.

Maintenance method of sliding door track

Keep the track clean to prevent foreign objects from entering. If the track has too much ash layer, the sliding door will have too much noise during use, and it is not flexible to push and pull up. If there is debris and dust, the brush can be used to clean, and the dust accumulation in the groove and door seal can be vacuumed, this method can be said to be simple and practical and fast!