Some owners feedback that the hollow doors and Windows of the home after a period of time, hollow glass in the middle of the water vapor, although it does not affect daily use, but it does affect the beauty, in the end why double-layer insulating glass will appear water vapor, today Xiaobian will talk about it in detail, hope to help you!

Causes of water vapor in double-layer insulating glass

First of all, it is necessary to know that the structure of double glass is composed of two or more pieces of glass with aluminum spacer in the middle, and then both sides of the glass are sealed by sealant. If the sealant is well sealed during the manufacturing process, there will be no water vapor. The situation caused by the water vapor is not caused by the seal, this situation even if the glass is not effective, only when the temperature rises the fog will naturally disappear, if not lucky, the hollow layer into the dust then it will affect the overall beauty.

Treatment of water vapor in the middle of double glass

1, first of all, we must understand the reason for the fog of double glass, if the glass is cracked and water, then the glass must be replaced.

2, if the double glass installation process is poor resulting in water vapor, then we can install the glass gasket on the double glass, in fact, the original septa strip removed, and then reinstall the new, but pay special attention to the septa paste position must ensure a certain distance. Special attention should be paid to the installation of glass Windows, the septal strip can not be stained with water, so as not to affect the installation quality of double glass.

3, if it is caused by the temperature difference, it is recommended to properly open the window for ventilation, then the natural water vapor will be removed, and the appropriate temperature difference can make the doors and Windows not easy to produce water vapor.

4, if there is water vapor soon after installation, we can find the master to disassemble the glass, and then clean it with an appropriate amount of diluted hydrofluoric acid, and then do the hollow treatment again, this method is only suitable for the hollow glass that has just been installed.

5, if the water mist time is longer, it means that the double glass has deteriorated and can not be cleaned. Only new insulating glass can be replaced.